国产精品无码AV无码,蜜臀久久久久久999草草,啊灬啊别停灬啊灬快点,美女露0的无挡写真

Your Position: Home > News > Industry News

How to filter hydraulic oil and dehydrate lubricating oil

2020/4/2??????view:

  How to filter hydraulic oil and dehydrate lubricating oil

  1、 Main physical properties of hydraulic oil

  Hydraulic transmission uses hydraulic oil (usually mineral oil) as working medium to transmit power and signal. Therefore, the quality (physical and chemical properties) of hydraulic oil, especially the mechanical properties have a great influence on the work of hydraulic system. Therefore, in the study of the hydraulic system, it is necessary to have a deeper understanding of the hydraulic oil and its performance, so as to further understand the basic principles of the hydraulic transmission.

  1. density

  The mass of a unit volume of liquid is called the density of the liquid:

  (=m/v) (8-1)

  Where V is the volume, M is the mass of the liquid with volume V, and P is the density of the liquid.

  Density is an important physical parameter of liquid. With the change of temperature or pressure, its density will also change, but the amount of change is generally small and can be ignored. The density of general hydraulic oil is 900kg / m3.

  2. Compressibility

  The compressibility of a liquid is defined as the change in volume caused by pressure. If air is mixed in the hydraulic oil, its compressibility will increase significantly, which will seriously affect the working performance of the hydraulic system. Therefore, the content of gas and other volatile substances (such as gasoline, kerosene, ethanol and benzene) in the hydraulic system shall be minimized.

  3. viscosity

  (1) Meaning of viscosity. When the liquid flows under the action of external force, the cohesion between the liquid molecules will hinder the relative movement of the molecules, that is to say, there is an internal friction force between the molecules, which is called the viscosity of the liquid. Viscosity is an important physical property of liquid, and also the basis of choosing hydraulic oil.

  Because the liquid has viscosity only under the action of external force, the liquid does not show viscosity at rest. The viscosity of liquid is expressed by viscosity.

  (2) The viscosity of the liquid. The specified quantity represents the quantity of viscosity. There are three kinds of viscosity commonly used, namely dynamic viscosity, kinematic viscosity and relative viscosity. Generally speaking, the brand of oil is actually kinematic viscosity.

  1) Dynamic viscosity μ. In China's legal measurement system and SI system, the unit of dynamic viscosity μ is pa · s (PA · s) or n · s / m2 (n · s / m2).

  In CGS, the unit of mouth is DGN · s / cm2 (dyne · s / cm2), and the fork is called P (poise). 1% of P is called CP (centipoise). The conversion relationship is as follows

  1Pa·s=10P=l03cP

  2) Kinematic viscosity v. The ratio of dynamic viscosity μ to density ρ of the liquid is called kinematic viscosity.

  V= / / (82)

  2、 Physical properties of water:

  Usually a colorless, odorless liquid.

  Boiling point: 99.975 ℃ (when the air pressure is a standard atmospheric pressure, that is 101.375kpa).

  Freezing point: 0 ℃

  Three phase point: 0.01 ℃

  Temperature at maximum relative density: 3.982 ℃

  Specific heat capacity: 4.186kj / (kg · ℃) 0.1MPa 15 ℃ evaporation latent heat: 2257.2kj / (kg) 0.1MPa 100 ℃

  Density: the maximum density of water is 1 × 103kg / m3 at 3.98 ℃, 0.99987 × 103kg / m3 at 0 ℃, and 0.9167 × 103kg / m3 at 0 ℃ for ice.

  Critical temperature: 374.2 ℃

  Thermal conductivity: at 20 ℃, the thermal conductivity of water is 0.006 J / s · cm · K,

  The thermal conductivity of ice is 0.023 J / s · cm · K,

  When the density of snow is 0.1 × 103 kg / m3, the thermal conductivity of snow is 0.00029 J / s · cm · K.

  Buoyancy classification: floating, floating, sinking, floating, sinking.

  3、 Pollution of water to hydraulic oil:

  For the particle pollution, now we pay more attention to it. Generally, we take corresponding measures to control it (for example, filter with filter element). However, there is not enough attention paid to other pollution, such as water, air, microorganism and so on. After particle pollution is effectively controlled, the harm of other pollutants to the system will be more prominent. People pay more and more attention to the harm of water to hydraulic and lubrication system.

  In practice and research, people realize that one of the main reasons for the deterioration of hydraulic oil performance is that water enters into the hydraulic oil. As one of the main pollutants in oil, water also causes many problems. The entry of water, especially a large amount of free water, destroys the formation of lubricating oil film in the hydraulic system. The lubricating performance of oil products drops sharply, resulting in wear, adhesion and metal fatigue on the moving surface, resulting in some metal abrasive particles. However, the existence of these small metal particles, especially copper or iron particles, will become the catalyst for the oxidation and decomposition reaction between water and oil products, resulting in the reaction Speed up. The reaction will generate acid corrosive products, insoluble pollutants and other harmful substances, which will cause parts to be corroded, valves to be stuck or oil sludge to be formed; water will increase the viscosity of oil or thin the oil film; in addition, water in hydraulic oil will react with oil under high working temperature, which will cause oil oxidation and deterioration, and reduce the service life of oil; When the water enters the oil, it increases the compressibility of the oil, leading to unstable operation; under the low temperature working condition, the water droplets in the oil condense into ice particles, blocking the gap or small hole of the control elements, causing system failure; it is easy to breed bacteria in the system, reducing the service life of the oil, and increasing the oil change cost; The additives in the oil are dissolved in the water, resulting in loss, reducing the performance of the hydraulic oil; reducing the lubricity of the oil, resulting in unstable operation of the equipment; accelerating the surface fatigue of the metal, insufficient protection of the metal parts, easy to rust or be corroded, reducing the service life of the metal parts; blocking the filter, reducing the filtering efficiency

成人H动漫精品一区二区无码| 亚洲AV无码一区二区三区乱子伦 | 国产一区二区三区在线电影| 蜜臀久久99精品久久久久久| 激情综合色综合啪啪开心| 艳肉观世音性三级| 粗大挺进尤物人妻中文字幕| 偷窥老女人XXHD| 欧美XXXX黑人又粗又长| 精品国产一区二区三区2021| 少妇撒尿W搡BBB搡WBBB搡| 啊灬用力灬啊灬啊灬啊灬A片| 人妻厨房出轨上司HD院线波| 国产午夜成人免费看片无遮挡| 少妇久久久久久久久久| 国内精品伊人久久久久影院对白| 免费男人脱女人的裤衩和奶罩| 亚洲一线产区二线产区区| 宫交H打桩HH灌尿| 8AV国产精品爽爽ⅤA在线观看 | 苍井空AV成人片免费观看 | A片扒开双腿猛进入免费观看视频| 日日噜狠狠噜天天噜AV| 精品人妻少妇嫩草AV无码专区| 人妻 色综合网站| 女人与动zzz0000xxxx| 成人精品一区日本无码网站| 人善交VIDEOS欧美| 996久久国产精品线观看| 西西人体444WWW高清大但| 无码人妻丰满熟妇啪啪网站牛牛 | 日本XXXB孕妇孕交视频| 他扒开我的裙底把舌头伸进去| 绿帽娇妻肚子被灌满精怀孕| 艳妇乳肉豪妇荡乳AV无码福利| 99精品视频在线观看免费| 国产人与禽ZOZ0性伦| 最近日本MV字幕免费高清在线| 少妇性饥渴无码A区免费| 四十如虎的丰满熟妇啪啪| 女人荫蒂添的好舒服A片|